|
7~20~7 |
|
|
|
|
|
|
Structurally Insulated Panelized System
(SIPs) Foam
Homes & Houses
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
We are
currently working with an
African Government to
provide homes & houses to
them to fulfill contracts
for several hundred thousand
homes for low income, and
private housing projects in
Central Africa.
|
|
|
|
|
|
|
|
|
Sips Homes &
Houses for sale, Expanded
Polystyrene Steel framed
Buildings; Manufacturers of Sips
Homes Houses & Buildings |
|
Contact form:
Please provide the
following contact information; |
Sips
Home Manufacturers.. Sips Homes for
sale.. SIPs Buildings for sale,
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contact
at info@advancedstructuralbuildingsystems.us for more information
on SIPs Homes & Houses or on how to become an equity partner in
our projects. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Foam Homes &
Houses, SIPs Homes & Houses, Expanded
Polystyrene (EPS)
Residential and Commercial Buildings-
Structurally Insulated Panel Systems
(SIPs) Homes,
Houses & Commercial buildings constructed
with Expanded Polystyrene
(EPS) foam and
tubular steel frames available from our
Manufacturers based in Prescott Arizona.
Contact us at the link below for a
SIPs Home, or
for an Expanded Polystyrene
(EPS)-
Styrofoam & steel framed house home or
commercial building. For more information
about the availability of a
SIPs; home or
an EPS house
please call
info@advancedstructuralbuildingsystems.us
|
|
Our
SIPs home
manufacturers can design any type of home,
house or commercial building to meet your
needs or requirements. Any where from a
simple cabin to a 10,000 (plus) sq ft Tuscan
Style Luxury home. Our buildings have an
R-30 rating on the walls, an R-50 on the
roof, and unlike conventional stick framed
homes we can provide a 17' vaulted ceiling
without additional cost to you. Our
Expanded Polystyrene
(EPS) tubular steel framed homes are
the most durable product available in the
market place |
|
For More
Information Contact:
at info@advancedstructuralbuildingsystems.us
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Building Panel Combines
Foam Insulation and Steel Frame
There are two
unmistakable trends in the home building
industry. First, dimensional lumber is
losing its place as the dominant
structural material. Second,
manufactured components are steadily
replacing site-built ones. Soon,
panelized walls will leap to greater
importance. , . is
well-positioned for both trends.
Their , .
engineered panels feature 18 ga. steel
tubes for strength and expanded
Polystyrene (EPS) foam for insulation.
Wall panels are 7-1/4 in. thick (R-30)
and roof panels are 11-1/2 in. thick
(R-50). EPS foam is ozone-safe, because
it uses air for a blowing agent, rather
than CFC and HCFC compounds used by some
other foam makers.
The panels are made by first
routing channels for the 1x2 steel
tubes. They are placed on opposite sides
of the panel every 24-in. Each tube is
connected to its mate with a long screw.
Foam separates the opposing steel tubes,
preventing thermal bridging. In the wall
panel, 5-1/4 in. separates the tubes.
Four steel angles placed on the top and
bottom edges join the steel tubes. These
angles can span the ends of adjacent
panels to lock them together. Panels can
be up 32 ft. long.
A 20 ga. steel angle wraps each
corner, and fastens to the tubes. Siding
screws directly to the tubes. Window and
door openings are built into the panels
and wrapped with 2x8 lumber. Roof panels
sit on a ridge beam, so the entire
upstairs has cathedral ceilings.
The wall panels can be used below
grade, too. The panels sit on a standard
footing. Treated plywood is attached to
the panel and then covered with
waterproofing.
With R-30 walls and R-50
roofs made from SIPs panels, the heating
load is about 25 to 30 percent of a
wood-framed house, so low that a
high-recovery water heater satisfies all
water heating and space heating needs. A
wiring chase is preformed into the wall
panels and electrical boxes attach to
the steel tubes. The manufacturer
recommends that plumbing be located in
interior partitions or in
specially-built plumbing chases.
The building system ludes a
unique feature:
minimalist rim joists. Only the top
chord of the metal-web floor truss bears
on the outside walls. The lower chord
hangs entirely inside the panel walls.
Instead of a 10- to 12-in. rim joist,
the comparable area in the , . wall is only 1-1/2-in. |
|
Roof Panels
Roof
panels by
are 4’ wide and 12” thick and up to
36’ long. They are supported by
ridge and purlin (mid-span) glue
laminated beams. Gable, Hip,
Mansard, Arched and Flat roofs can
all be constructed using roof panels.
By design all roofs are vaulted in
the interior. The vaulted area can
be left vaulted and showcase the
expansiveness of your rooms or a
floor can be constructed within to
create a loft area thereby
increasing square footage of living
space within the same sized
envelope.
Skylights and dormers are
easily incorporated into roofs. |
|
Exterior
Walls
Standard exterior wall panels are 7
1/4" thick. Other thickness sizes
are available specific to individual
customer needs. All window and door
openings, and associated headers,
are built into the panels at the factory.
Further, an electrical chase is
factory routed into each wall panel.
In most cases it is not
necessary to use exterior sheathing,
however, all panels should be
wrapped in the field with house wrap
as a good building practice.
Wall panels are custom made
specific to each structures í
architectural plans. Lengths may
vary from 3" to 40' or more, and
while panel heights of 8', 9', and
10' are standard,
will build wall heights of any size
to suit your needs. Curved walls are
also available as part of our
standard panel offering.
All types of exterior finishes;
aluminum siding, brick, cedar shake,
metal siding, stone, stucco, vinyl
or wood siding are compatible with
the panelized
wall system.
|
|
Gable Panels
Typically
gable wall panels are the same
thickness as the exterior walls
below them. All necessary structural
support for roof load beams, and any
openings are orporated into them |
|
|
|
|
For More
Information Contact: at
info@advancedstructuralbuildingsystems.us |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Energy Efficient Residential and Commercial SIPs Buildings
Energy Efficient, Expanded
Polystyrene (EPS), Structurally Insulated Panelized System
(SIPs) Foam Homes & Commercial Buildings for sale.
Polystyrene & Steel Framed Foam Homes; Expanded Polystyrene
EPS & SIPs Foam Houses;
Expanded Polystyrene EPS - SIPs Steel & Foam Commercial
Buildings currently available from us.
Our Arizona
SIPs Homes, House, and Building Manufactures located in
Prescott Arizona can provide these Expanded Polystyrene Foam
and Steel Framed Structurally Insulated Panelized System
(SIPs) buildings, homes & Houses anywhere within the
United States for less than a conventionally priced home,
house or building would cost.
Our Energy Efficient homes
can be build for less than a traditional site built house,
they will save you thousands in heating and cooling bills,
are resistant to mildew, mold, insects, and you can be in
one in less time than a traditional house.
Our typical 3000 sq ft
houses and houses with R-30 walls, and R-50 roof structures
are designed to generally have an approximate monthly
energy HVAC Costs
of somewhere around $25.00 a month for
"Air Conditioning and Cooling Costs"
in locations similar to Central African Arizona during the
summers, and of around $ 20.00 to $30,00 a month for
"Heater and Heating Costs" for
locations similar to those in Colorado, South Dakota, and
Northern Idaho during the winters.
An example of these HVAC costs; was for a
home in Prescott Arizona with approx. 3400 sq.ft. of living
area that averaged less than $25 a month in heating and
cooling bills over the course of a year. Similarly
constructed homes, houses, and commercial buildings benefit
from the same degree of Energy
Efficiency from our product. To see to see what a
typical 3,000 SQ FT house's average monthly heating and
cooling costs are like go to our
Energy Ratings
link.
Our durable
Super Strong homes have a
superior survival range because our
Expanded Polystyrene
SIPs Foam & Steel homes are
designed to withstand winds in excess of 160 mph and to meet
seismic Zone 4 requirements.
Our insect and virus
resistant homes are resistant to termites, carpenter ants,
and dry rot ;along with being resistant to mold and
mildew. Out homes do not outgas because our Expanded
Polystyrene EPS SIPs Foam Homes
contains no CFC's or HCFC's .
The homes can have a heating system that
is perfect for individuals that have allergies or chemical
sensitivities; you can
have an air purification system installed in your home
that ensures clean, healthy air for all of the members of
your family.
Our homes are
pre-engineered from your blue prints in as little as three
weeks from the time we receive them and your
per-construction funding is in escrow.
For frequently asked questions about SIPs
and Expanded Polystyrene EPS Foam Homes, Foam Houses and
EPS Polystyrene Foam Commercial Buildings
go to our
SIPs -FAQ
link
.
For more
detailed and specific technical and assembly information
about our SIPs and Expanded Polystyrene EPS Foam Homes,
Foam Houses and EPS Polystyrene Foam Commercial Buildings
please see our
Sips Technical Questions
link.
After you have decided to purchase one of
our Expanded Polystyrene (EPS) SIPs Foam & Steel Buildings;
please complete the following form and an experienced agent
that is knowledgable in our Foam &
Steel - Structurally Insulated Panelized Building System
(SIPs) will contact you about the advantages of
having a Expanded Polystyrene SIPs
home or house build for you.
|
|
|
|
|
|
|
|
|
|
|
|
For more information
please contact: at
info@advancedstructuralbuildingsystems.us |
|
|
This Structurally Insulated Panelized
(SIPs) Home in
Prescott was constructed with Expanded
Polystyrene Steel Framed Panels have a life
expectancy of 70 years with an average heating
and cooling cost of under $35.00 a month |
|
Prime Lending- has
several residential home loans, and commercial
financing programs
tailored to your
unique situation.
Our staff of
mortgage service professionals strive to obtain
the best mortgage loan package no matter what
the situation. |
|
This Prescott home was constructed using Expanded
Polystyrene (EPS), Structurally insulated panels
(SIPs), Expanded Polystyrene (EPS) Steel Framed
Panels.
Our
Arizona SIPs Homes, House, and Building manufactures
located in Arizona can provide these Expanded
Polystyrene Foam and Steel Framed, Structurally
Insulated Panelized System (SIPs) buildings
anywhere within the United States for less than a
conventionally priced home, house or building would
cost.
Our
typical 3000 sq ft houses and houses with R-35
walls, and R-41 roof structures are designed to
generally
have an approximate
monthly energy
HVAC
Costs
of somewhere around $25.00 a month for
"Air Conditioning and Cooling
Costs" in locations similar to Central
African
Arizona during the summers, and of around $ 20.00
to $30,00 a month for "Heater
and Heating Costs" for locations similar to
those in Colorado, South Dakota, and Northern Idaho
during the winters.
An example of these HVAC costs;
was for this home in Prescott Arizona with approx.
3400 sq.ft. of living area that averaged less than
$25 a month in heating and cooling bills over the
course of a year. Similarly constructed homes,
houses, and commercial buildings benefit from the
same degree of Energy
Efficiency from our product.
Contact at: info@advancedstructuralbuildingsystems.us
E-mail
info@advancedstructuralbuildingsystems.us |
|
|
|
|
|
|
|
|
|
|
|
|
Expanded Polystyrene
Foam (EPS) Steel Framed
Structurally Insulated Panelized
(SIPs) Homes |
|
|
|
|
Energy Efficient
Structurally Insulated Panelized (SIPs) Foam &
Steel Framed Structurally Insulated Residential and
Commercial Buildings
~ Structurally
Insulated Panelized System
(SIPs) Foam Homes & Commercial Buildings.
Polystyrene & Steel Framed Foam Homes; Expanded
Polystyrene (EPS) &
SIPs Foam Houses;
Expanded Polystyrene (EPS)
SIPs Steel & Foam Commercial Buildings
|
|
|
|
|
|
Sub Division
Developers, Home Builders and General Contractors:
Please contact us about the availability of these
Expanded Polystyrene (EPS) - Steel & Foam Homes,
Foam & Steel Homes, and Expanded Polystyrene
(EPS)-Steel & Foam Commercial Buildings for your
sub-division or residential development; and
potentially save "Millions"
on the over all development of your project,
because of reduced completion time required to
construct a home or House. |
|
|
|
|
|
Energy Efficient,
Expanded Polystyrene (EPS),
Structurally Insulated Panelized System
(SIPs) Foam Homes &
Commercial Buildings. Expanded Polystyrene
(EPS) Steel Framed Foam
Homes; Expanded Polystyrene
EPS & SIPs Foam Houses;
Expanded Polystyrene EPS - SIPs Steel & Foam
Commercial Buildings . Our Arizona SIPs Homes,
House, and Building manufactures located in Northern
Arizona can provide these Expanded Polystyrene Foam
and Steel Framed, Structurally Insulated Panelized
System (SIPs) buildings
anywhere within the United States for less than a
conventionally priced home, house or building would
cost. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Manufacturers of Foam
Homes, Manufactures of Sips Homes & Houses, Manufacturers of EPS
- Poly Styrene Foam & Steel Homes and Commercial Buildings,
Manufactures of Structurally Insulated homes & Houses in
Alabama, Alaska, American Samoa, Arizona, Arkansas, California,
Colorado, Connecticut, Delaware, District of Columbia, Federated
States of Micronesia, Florida, Georgia, Guam, Hawaii, Idaho,
Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine,
Marshall Islands, Maryland, Massachusetts, Michigan, Minnesota,
Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire,
New Jersey, New Mexico, New York, North Carolina, North Dakota,
Northern Mariana Islands, Ohio, Oklahoma, Oregon, Pennsylvania,
Puerto Rico, Republic of Palau, Rhode Island, South Carolina,
South Dakota, Tennessee, Texas, U.S. Minor Outlying Islands,
Utah, Vermont, Virgin Islands of the United States, Virginia,
Washington, West Virginia, Wisconsin, Wyoming |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|